Product ID:SILICONE FREE HEAT SINK COMPOUND, 1703 BULK
MSDS Date:08/17/1989
FSC:6850
NIIN:00N026470
MSDS Number: BMRRW

Emergency Phone: 806-372-8523

Info Phone: 800-372-8523

Preparer: J. WITCHER

Cage: DO989

Telephone: 806-372-8523

Cage: 54700

NON HAZARDOUS INGREDIENTS

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:NO Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYES: MILD IRRITATION. SKIN: VERY
MILD, IF ANY IRRITATION. INGESTION: NAUSEA AND DIARRHEA ARE
POSSIBLE.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:NONE SPECIFIED BY MANUFACTURER.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:SKIN: FLUSH WITH COPIOUS AMOUNTS OF WATER . EYE: FLUSH WITH
WATER FOR AT LEAST 15 MINUTES . INGESTION: CALL MD IMMEDIATELY .
INHALATION: REMOVE FROM EXPOSURE. SUPPORT BREATHING (GIVE
ARTIFICIAL RESPIRATION/OXYGEN). CALL MD .

Flash Point Method:TCC
Flash Point:450F,232C
Extinguishing Media:WATER, FOAM, DRY CHEMICAL, CARBON DIOXIDE.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED POSITIVE PRESSURE
SCBA & FULL PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE.

Spill Release Procedures:PICK UP AND PLACE IN APPROPRIATE CONTAINER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:NONE SPECIFIED BY MANUFACTURER.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

Respiratory Protection:WEAR NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE
FOR EXPOSURE OF CONCERN .
Ventilation:NORMAL AMBIENT TYPE ROOM ATMOSPHERE.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:NONE SPECIFIED BY MANUFACTURER.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

HCC:N1
Spec Gravity:2.0
Solubility in Water:0
Appearance and Odor:OPAQUE WHITE CREAM WITH LOW ODOR.
Percent Volatiles by Volume:0

Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:FORCED COMBUSTION YEILDS CARBON AND
SILICONE OXIDES.

Waste Disposal Methods:DISPOSAL BY FORCED INCINERATION OR SANITARY
LANDFILL. CONSULT LOCAL, STATE, AND FEDERAL DISPOSAL LAWS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.